Home / MC285C-2

MC285C-2 Mini Crawler Crane

Maeda Mini Crane MC285C

The MC285C-2 Mini Crawler Crane is an excellent option for areas with limited access. Its compact design allows it to easily travel through a standard-size door, making it a convenient choice for a variety of indoor projects.

Equipped with a Single Fall Hook, Searcher Hook, and a Paddle Lever Radio Remote Control, the crane offers optimal lifting control and accuracy.

The MC285C-2 boasts a lifting capacity of 2.82t x 1.4m, a maximum working radius of 8.205m X 0.15t, and a maximum lifting height of 8.7m on the ground. Its slim body width of 750mm.

If you are in Melbourne and require a mini crawler crane for your lifting and installation needs, you can hire the MC285C-2 at Mass Hire.

MC285C - 2 Attachments

Searcher Hook

The Searcher Hook can be used to lift loads that have limited headroom.

Single Fall Hook

The Single Fall Hook allows the crane to be rifted into one fall configuration, allowing for more wire rope length.

Paddle Lever Radio Remote Control

The Paddle Lever Radio Remote Control allows the operator to have more visibility of lifting operations whilst maintaining full control.

Glass Vacuum Lifter 320 Kg Inline

Our Glass Lifter has a Working Load Limit for flat glasses of 320 kg.

Glass Vacuum Lifter 635kg Inline

Our Glass Lifter has a Working Load Limit of 320 kg (4 suction pads) / 635 kg (8 suction pads).

Glass Vacuum Lifter 800kg Spider

The Glass Lifter has a Working Load Limit for flat glasses: 400/600/800 kg (4/6/8 suction pads Ø 400 mm).

Technical Information

Diagram of working radius

Additional information

Technical Information

Diagram of working radius

Additional information

Get in touch with us to rent the equipment you require and discover the full scope of our services.

MC285-2 Mini Crawler Crane - Technical Data

OUTRIGGER EXTENDED TO MAXIMUM

2.535m/4.075m Boom		5.575m Boom		7.075m Boom		8.575m Boom
Working radius(m)	Rated total load(t)	Working radius(m)	Rated total load(t)	Working radius(m)	Rated total load(t)	Working radius(m)	Rated total load(t)
1.4 or less	2.82	3.0 or less	1.22	3.6 or less	0.82	4.0 or less	0.55
1.5	2.52	3.5	0.97	4.0	0.74	4.5	0.40
2.0	1.92	4.0	0.78	4.5	0.58	5.0	0.34
2.5	1.57	4.5	0.63	5.0	0.48	5.5	0.30
3.0	1.22	5.0	0.53	5.5	0.43	6.0	0.27
3.5	0.97	5.205	0.53	6.0	0.38	6.5	0.23
3.705	0.92			6.5	0.35	7.0	0.20
				6.705	0.33	7.5	0.18
						8.0	0.15
						8.205	0.15

OUTRIGGER EXTENDED TO OTHER THAN MAXIMUM

2.535m/4.075m Boom		5.575m Boom		7.075m Boom		8.575m Boom
Working radius(m)	Rated total load(t)	Working radius(m)	Rated total load(t)	Working radius(m)	Rated total load(t)	Working radius(m)	Rated total load(t)
1.5 or less	1.72	3.0 or less	0.51	3.6 or less	0.40	4.0 or less	0.33
2.0	1.07	3.5	0.41	4.0	0.33	4.5	0.28
2.5	0.63	4.0	0.33	4.5	0.28	5.0	0.23
3.0	0.52	4.5	0.28	5.0	0.23	5.5	0.18
3.5	0.39	5.0	0.20	5.5	0.18	6.0	0.16
3.705	0.35	5.205	0.20	6.0	0.16	6.5	0.13
				6.5	0.13	7.0	0.10
				6.705	0.12	7.5	0.08
						8.0	0.07
						8.205	0.06

IMPORTANT

* The Rated Toal Load Chart is based on actual working radius including boom deflection.

* The weight of hook block (standard 4 fall / 2 fall-30kg) must be included as part of the load shown in the Rated Total Load Chart.

* When using two falls hook or single fall hook, use the appropriate four falls Rated Total Load Chart shown above but with a maximum load of: -1410kg for two falls and -710kg for single fall.

SPECIFICATIONS
MC285C-2 Mini Crawler Crane

MODEL		MC285C-2
Crane capacity		2.82t x 1.4m
Max.working radius		8.205m x 0.15t
Max.lifting height (on the ground)		8.7m
Max.lifting height (underground)		-10.1m (4 falls)
Winch system	Hook speed	9.3m/min (4 layers, 4 falls)
	Hoist wire rope	IWRC 6 x Fi (29) 0/0, ø7 x48.0m
Telescoping system	Boom length	2.535m ~ 8.575m
Outrigger system	Type	1st stage with flexible stay damper, 2nd stage manual pullout, hydraulic cylinder direct-acting type.
	Max.extended width	(Lateral) 4,580 x (Front) 4,530 x (Rear) 3,810mm
Travel system	Type	Hydraulic motor driven, stepless speed changer
	Travel speed 1 step/2 step	0 ~ 2.2km/h
	Gradability	20deg
	Crawler ground length x width	975 x 200mm
	Ground pressure	48.7kpa [0.497kgf/ cm²]
Engine (diesel)	Mode	YANMAR 2TNV70-NMB
	Displacement	569CC [0.569L]
	Rated output	7.4kw [10.1ps]/2,500 rpm
	Starting method	Electric Starting
	Fuel/Fuel tank capacity	Diesel / 12.0L
Remote control system	Type	Cable remote controller
Overall length X width X height (MC285C (G) RM-2)		2,750mm x 750mm x 1,470mm
Machine weight (MC285CRM-2)		1960kg
Optional Equipment		Single fall hook, 300kg/850kg searcher hook.

Mini crawler crane hire Melbourne

MC-174C Mini Crawler Crane