Home / MC-174C

MC-174C Mini Crawler Crane

Maeda MC - 174C

The MC-174C mini crawler crane fits into elevators and limited areas, with a crane capacity of 1.72t x 1.0m, a maximum working radius of 5.17m x 0.22t, and a maximum lifting height of 5.50m.

It features a paddle lever radio remote control, a single fall hook, and a searcher hook with a 300kg capacity. You can rent this crane in Melbourne from Mass Hire, your top lifting supplier.

MC - 174C Attachments

Searcher Hook

The Searcher Hook can be used to lift loads that have limited headroom.

Single Fall Hook

The Single Fall Hook allows the crane to be rifted into one fall configuration, allowing for more wire rope length.

Paddle Lever Radio Remote Control

The Paddle Lever Radio Remote Control allows the operator to have more visibility of lifting operations whilst maintaining full control.

Glass Vacuum Lifter 320 Kg Inline

Our Glass Lifter has a Working Load Limit for flat glasses of 320 kg.

Glass Vacuum Lifter 635kg Inline

Our Glass Lifter has a Working Load Limit of 320 kg (4 suction pads) / 635 kg (8 suction pads).

Glass Vacuum Lifter 800kg Spider

The Glass Lifter has a Working Load Limit for flat glasses: 400/600/800 kg (4/6/8 suction pads Ø 400 mm).

Technical Information

Technical Dimension

Additional information

Technical Information

Technical Dimension

Additional information

Get in touch with us to rent the equipment you require and discover the full scope of our services.

MC-174C Mini Crawler Crane - Technical Data

OUTRIGGER EXTENDED TO MAXIMUM

Position Telescope	Distance Wheel to Load	Ks 1x Box (14x 16kg)	Ks 2x Box (28x 16kg)	K 1x Box (14x 16kg)	K 2x Box (28x 16kg)
1	260mm	380 kg	745 kg	900 kg	900 kg
2	400mm	265 kg	555 kg	700 kg	900 kg
3	540mm	210 kg	455 kg	560 kg	880 kg
4	700mm	175 kg	365 kg	465 kg	740 kg
5	840mm	150 kg	310 kg	400 kg	645 kg
6	980mm	125 kg	275 kg	340 kg	565 kg
7	1.120mm	110 kg	240 kg	300 kg	500 kg
8	1.260mm	100 kg	215 kg	260 kg	455 kg
9	1.400mm	85 kg	160 kg	240 kg	410 kg
WITH LONG TELESCOPE
1	1.160mm	*	*	*	510 kg
2	1.300mm	*	*	*	460 kg
3	1.440mm	*	*	*	415 kg
4	1.600mm	*	*	*	375 kg
5	1.740mm	*	*	*	350 kg
6	1.880mm	*	*	*	325 kg
7	2.020mm	*	*	*	300 kg
8	2.160mm	*	*	*	285 kg
9	2.300mm	*	*	*	265 kg

OUTRIGGER EXTENDED TO OTHER THAN MAXIMUM

1.83m Boom		2.97m Boom		4.21m Boom		5.45m Boom
Working radius(m)	Rated total load(Kg)	Working radius(m)	Rated total load(Kg)	Working radius(m)	Rated total load(Kg)	Working radius(m)	Rated total load(Kg)
1.0 or less	1220	1.0 or less	1220	1.3 or less	940	1.7 or less	720
1.30	940	1.30	940	1.50	810	2.00	600
1.55	790	1.50	810	2.00	600	2.50	390
		2.00	600	2.50	390	2.80	330
		2.50	390	3.00	300	3.00	300
		2.69	310	3.50	220	3.50	220
				3.93	180	4.00	180
						4.50	140
						5.17	100

IMPORTANT

The Total Rated load chart is based on the actual working radius with the bending of the boom attributable to the load reflected and is shown with the mass of the hook (20 kg) included.

SPECIFICATIONS - MC-174C Mini Crawler Crane

MODEL		MC-174CRM
Crane capacity		1.72t X 1.0m
Max.working radius		5.17m X 0.22t
Max.lifting height (on the ground)		5.50m
Max.lifting height (underground)		-7.0m (4 falls)
Winch system	Hook speed	10.9m / min (3 layers, 4 falls)
	Hoist wire rope	IWRC 6 X Fi (29) 0/0, ø6 X 35.0m
Telescoping system	Boom length	1.83m ~ 5.45m
Outrigger system	Type	1st stage with flexible stay damper, 2nd stage manual pullout; hydraulic cylinder direct acting type
	Max.extended width	(Lateral) 3,335mm X (Front) 3,060mm X (Rear) 2,885mm
Travel system	Type	Hydraulic motor driven , 2 step speed changer
	Travel speed 1 step/2 step	2.0 / 3.2km/h
	Gradability	20.0 deg
	Crawler ground length x width	1.044mm X 180mm
	Ground pressure	33.7kpa [0.34kgf/cm²]
Engine (diesel)	Mode	MITSUBISHI GB400LE
	Displacement	0.391L [391cc]
	Rated output	6.6kw /1,800min-¹ [9.0ps /1,800rpm]
	Starting method	Electric starting
	Fuel/Fuel tank capacity	Gasoline / 6.0L
Remote control system	Type	Cable remote controller
Overall length X width X height		2,000 X 590 X 1,300 mm
Machine weight		1,290Kg
Options		White rubber track, Single fall hook, 2-fall hook